Grinding wheel dicing machine

HAD3310 Dicing Saw Machine

Main features:

1.Large size cutting range processing, The maximum processing size is 12 inches, With imported spindle, standard 2.4KW high-power spindle

2.Selection of Non contact altimeter (untouched)NCS);

3.Selection of blade breakage detection (BBD);

4.Direct drive in θ axis with DD Motor, high precision, fast speed;

5.high speed image recognition function, multiple alignment mode, fast edge search, greatly improve efficiency.


12 inchIC、PCBCeramics, glass, lithium niobate, alumina, quartzPrecision cutting of such materials; widely used.IC integrated circuit(8-12inch)、LEDEncapsulation,QFN、DFN、BGAOptical optoelectronic, communicationAnd other industries.


Conditions of use:

1. please set the machine in a 20~25 C environment (the range of fluctuation is within + 1 c); the indoor humidity is less than 80%, and there is no condensation.

2. please use the air pressure dew point below -15 C, the residual oil is 0.1ppm, the filtration degree is above 0.01um/99.5, clean compressed air.

3. please control the water temperature of the cutting water at room temperature of +2 C (within the range of + 1 c), and the water temperature of the cooling water is the same as that of the room temperature (the fluctuation range is controlled at + 1 degrees Celsius).

4. please avoid the gravity impact of the equipment and any vibration threat from the outside world. In addition, please do not install the equipment near the blower, the vent, the high temperature device and the oil producing device.

5. please install the equipment in a waterproof floor and a place with drainage treatment.

6. please do the operation in strict accordance with the instructions of the company's products.

No. 19 Hunnan East Road, Hunnan New District, Shenyang, Liaoning Province, China
No. 19 Hunnan East Road, Hunnan New District, Shenyang, Liaoning Province, China
Hanway Copyright @ 2016~2024 Shenyang Hanway Technology Co., Ltd. All rights reserved